Bell 47G & Sioux H-13 FSX 2012
DESCRIPTION: OVER 400 COPY'S SOLD IN 4 WEEKS
The Bell 47 is a two-bladed, single engine, light helicopter manufactured by Bell Helicopter. The Bell 47 became the first helicopter certified for civilian use on March 8 1946. The bell G 2 uses the 47GLycoming O-435 / 190HP as the H-13 is 195HP. The Bell 47 helicopter entered U.S. military service in late 1946 and was designated the H-13 Sioux by the United States Army. It has also served as the helicopter of choice for basic helicopter flight instruction in many countries. NASA had a number of Bell 47s during the Apollo program, used by astronauts as trainers for the Lunar Lander.
This package includes the Sioux H-13 or known from the television show MASH (Mobil Army Surgery Hospital) and the Bell 47G with skids, floats and a crop duster model. Each model is around 160,000 poly's with high quality real world photos. From the moment you crank over the engine the first time, the Hobbs hours counter will start tracking your running engine until you remove the aircraft from your game. Turn the governor switch off and fly like a real pilot controlling throttle using the propeller pitch axis. Leave the governor switch on and the throttle will auto adjust to make your experience easy and fun. Send back your exact transponder code the tower just sent you to squawk while flying on Vatsim. For the first time you can now pushback your helicopter from your hanger using our custom pushback animation. This package was developed to make your experience feel real and easy to operate from beginner to the flight sim pro. Time to make room in your private hanger, this package is priced extremely low and will be your favorite for many many years.
_______________________________
Features:
- Real world high quality 3D gauges
- High quality photo real textures (Bump and world reflections)
- 360 degrees of animation inside and out!
- Bones animated pilot, cable, collective boots and springs
- Flysimware's virtual cockpit sound module
- High quality 6 cylinder engine
- Speed controlled sounds for doors and heater vent
- Hard coded lights
- Engine operation tracking gauge (starts at 19,100 hours)
- 4 paint themes and 5 high quality models
- Dual anolog clock (Tracks flight time)
- Animated wind effect on main rotors
- Animated push back mode
_______________________________
ANIMATION: Part(s) .......................... Visible in model(s)
- Collective & Linkage .......................VC - Exterior
- Cyclic & Linkage ............................VC - Exterior
- Pedals & Linkage ...........................VC - Exterior
- Pilot .............................................VC - Exterior
- Doors ...........................................VC - Exterior
- All Switches, Levers and Gauges .....VC - Exterior
- Throttle & Linkage .........................VC - Exterior
- Hydralic Stablilizer & Linkage ..........Exterior
- Hydralic Rotor & Linkage ................VC - Exterior
- Hydralic Tail Rotor & Linkage ..........Exterior
- Driveline & U joints.........................Exterior
- Fans ............................................VC - Exterior
- Tires ............................................VC - Exterior
Animation is available in all views, including the tower. We have included 3 custom VC views: Co-Pilot, Radios, Engine Hours Counter
There are 6 custom exterior views giving you high quality replays.
_______________________________
SOUNDS:
- Default R22 Sounds
- Bonus custom sound module includes 32 bonus sounds
- (Developers who want a sound module contact)
- Bill Leaming http://eaglesoftdg.com
_______________________________
VARIATIONS: 5 Models
- Bell 47G Skids ....................with doors
- Bell 47G Skids ....................with no doors
- Bell 47 G Crop Duster .........no doors
- Bell 47 G Floats ..................with doors
- H-13 MASH ........................with doors - no fans - no tires
- Bell 47G Skids ....................with doors NO VC PILOT
PAINT THEMES : 8 Choices
- Army Green .......Skids, Crop Duster and Floats
- Yellow ..............Skids, Crop Duster and Floats
- Camo ..............Skids
- MASH..............Skids
_______________________________
INSTRUCTIONS:
- Run the Self-installer.
- Aircraft is located as flysimware under the Manufacturer list.
- RE-PAINT KIT UPDATED DOWNLOAD HERE
_______________________________
TESTING:
- FSX SP2
- FSX ACCELERATION
- XP,Vista, Windows 7 / 32bit & 64bit
- Email us if you have any issues with our software!
- Tip: Due to so many exterior parts that need shadows, turn off cast shadow on itself under aircraft settings. Leaving this mode on eats up 15 frames. But leave shawdows on.
_______________________________
-
Developers: Mark Taylor
- Special thanks to Rich Baker for donating 300 photos
Demo
Demo Video
Flysimware™ Software accepts no responsibility whatsoever from damage to your PC/Computer that may arise from the installation of the software that is provided on these pages. All the software is created and produced by Flysimware™ Software.
By downloading and / or using these items you accept the terms of the License Agreement as shown, and any additional terms or items in the individual license agreement supplied with the item. You have also accepted the general Disclaimer, so make sure you have read both before downloading or using anything from this section of the site. In general terms that means you use them at your own risk, and we accept NO RESPONSIBILITY WHATSOEVER for anything that may occur as a result of your use of, or inability to use, any item provided.
DISCLAIMER: Flysimware™ Software is not affiliated with any related material, products, or software. This model is made strictly for Microsoft Flight Simulator 2004 and Microsoft Flight Simulator X. We are not resembling and/or another product or vehicle. Flysimware™ Software produced this software for MFS purposes only.
Bell 47 from Flightsimware I have tested this helicopter
I like the performance, it performs real well. From A scale 1-10 I give it a 10
The rotator blades looks real, the movement of the swash plate looks like it does in a real helicopter.
I recommend this helicopter to anyone easy to fly.
Matt Arnold
Rating: [5 of 5 Stars!]
I am pleasantly surprised by this little bird. It flies fairly well and is fun. The flight dynamics could use a little work, but it does fly nicely. The the visuals are much better than in the video except for geek, his face sure could use some work. The helicopter visual modeling is beautiful. real class job on the outside. The inside is great too except for the above mentioned. It has four different models and in different colors. The crop duster is fun to fly and actually works. Real neat effects. this little bird was well worth the 12.50 payed for it on sale. Get it before the weekends over you won't regret it.
Bonedaddy
Rating: [4 of 5 Stars!]
For me it is the most beautiful hélicopter of FSX. Really.
In the VC with the 3D NVIDIA glasses, I have the impression to be in the real cokpit.
I flied and obtened my TTH with the Bell 47 in 1981 1982 near Paris in France in the real world.
Thank you very much for your remarquable work.
Sorry for my english.
Regards.
Laurent
Rating: [5 of 5 Stars!]
Delivery Guy wrote:
We have created a new face and increased the pilots size on our newest project, the Bell 204/205 & UH-1. We are also updating the pilots texture with a real world face. Flysimware is looking forward to releasing the Bell 205 with fantastic results. These models will have by far the most options and animations on the market. Available late JAN 2012.
